Terry, It is a L18 bored to 1887mm with a big port head and a hotish cam, Twin 45 webbers on a datrally manifold which is match ported. Datsun Specials HM headers, 2 1/4 exhaust. EI dissy. And it runs on normal super. And thats all I know. Sorry! I DO know it make 108Kw at the rear wheels! I also know that power comes on at 3300rpm approx and finishes at 7200 rpm approx. I leave the car over nite before I adjust them so they are always cold and I set them with the lobe pointing up and then I loosen the lock nut slide the feeler gauge in between the rocker arm and the cam and then adjust the adjusting bolt until I obtain my clearence, and then keep the feeler gauge in there and I then tighten the locking nut and then check again with the feeler gauge until it is perfect,- I repeat this as many times until it is correct.The engine is about 4 yrs old, but I have no idea as to stats on the engine other then what I have already told you above, Sorry about that. Cherers NAT __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
