Zac,
The "X" offset is the distance from the mounting face on the hub to the
inner face of the spoke surfaces. This distance is need to clear the
caliper.
Cheers
Feral Errol

----------
From: Zac Campbell <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: Bluebird/Skyline Mother! Brakes
Date: Wednesday, October 04, 2000 11:22

I just had a look at a 200SX and thought there must have been 2cm MAX from
the disc to the outside of the caliper then I realised you wrote X offset
so
you mean the wheel diameter. A 15 inch wheel at least?

zac

----- Original Message -----
From: Zac Campbell <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 04, 2000 9:58 PM
Subject: Re: Bluebird/Skyline Mother! Brakes


> mmmmm, big!!!
> Did you consider using a U13 Bluebird disc? I *think* this is the same
disc
> as the S13 SR20DET. Also is 4-bolt so may bolt on?
> Anotehr one I looked at was a J30 >2/95 Maxima disc.
> These two discs keep the track close to what I have now which is a 48mm
hh
> 200b setup.
> Also is the 65mm offset a backspace? that sounds like a huge offset. You
> must have fitted wheel spacers?
>
> zac
>
> ----- Original Message -----
> From: Errol Smith <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, October 04, 2000 9:59 PM
> Subject: Bluebird/Skyline Mother! Brakes
>
>
> > Listers
> > If any one is interested in some good brakes for Bluebird/Skyline I
have
> > just posted some pics of my 300ZX calipers on DBA Verada's discs for
> > perusal.
> > Check them out at  Datrats.com.au (203.33.35.34) in the Brakes section.
I
> > can recommend these (with Bendix Ultimates) they are nearly
unburstable!
> > Cheers
> > Feral Errol
> >
> >
>
>


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to