If anybody wants them, I have a set of new L14 rods...no use to me, so they
are free (apart from postage) to whoever want's them. I'd rather give them
away than throw them away!
> Tom,
> The combo sounds good to me. The only change I would make (if they were
> available) is to use L14 rods (3mm longer again than L16 136.65 giving
> 1.752 rod stroke ratio). I would then skim the dish of the piston crown
and
> deck the block to suit. I would use the V91 head with welded chambers 44mm
> inlets and 36 exhaust's and a good 40mm+ port job. It would be 8000 rpm
> material easily with some good valve springs. Balancing is cheap!!!
> The Z22 pistons are readily available and the genuine Nissan ones are very
> strong.
> Cheers
> Feral Errol
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
