Jim,
One thing you didnt mention in your setup was anything about cam's? Any
eperiences with different cams or did you always use the original spec cam?? I
just put a big port head on my z18 and got a billet cam made up from camtech,
put it all back together and its making less power!! the cams way too big, so im
about to slot the stocker cam back in and see what the power difference is.
Cheers
Steve.
Jim Jones wrote:
> Good to see you are still around
>
> Yes, I sold the motor and the Motec but to different people.
>
> I brief run down as follows:
>
> Cosworth Pistons, Titanium Crank and Rods o-ringed block , modified the
> inlet manifold to incorporate 8 injectors ( Holden Camira bosses 8 x FJ
> injectors on 30PSI the duty cycle never got above 65%, with 70PSI fuel
> Pressure), Large front mounted intercooler, 4 inch dump pipe ( 1 meter
> long ) into 3 inch mandrel bent exhaust, .82 Garrett with T4 comp cover 3
> inch inlet split pulse high grade nickel exhaust housing ( forget Garrett
> get a turbonetics T66-1) a flash can inside the car is essential, about 40
> hours of head work and the list goes on.
>
> It only seen Ravenswood once with a 13:01 110mph on 15psi with the bonnet
> over the roof ( invest in bonnet pins) . We wound it up to 25psi and in the
> traps snapped both stub axles game over.
>
> The motor has a shit load of potential and with the four bar map sensor
> 32PSI was a lot of fun.
>
> Other than Bretts own FJ not much else came close.
>
> Is yours pretty much standard?.
>
> Jim
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of FJ MAN
> Sent: Saturday, 28 October 2000 14:27
> To: [EMAIL PROTECTED]
> Subject: Jim jones
>
> hey jim havent spoken to ya on the list in a while
> was up at the drags the other day and a bloke their knew ya
> didnt catch his name but he had a z18et in a white 1600 with spoke msgs
> fairly quick car. But i also heard someone over hear has brought you 1600
> and has big plans for it, is there any chance of u givin me details of what
> your z18et had done to it as ive aquired one myself and im hoping to do a
> fair few mods to it on top of whats aready done :) cheers mate have a good
> one (and yeah it beat a v8 and an sti ( after it got going(its still using a
> open r160 diff) so it wasnt a bad car).
> regards chris
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
