Andrew,
Where do get a copy of this chart as I have been searching for a chart of
Bosch EFI pump specs and cannot find one on the web.
Cheers
Feral Errol
www.Datrats.com.au
----------
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: fi fuel lines for 1600
Date: Thursday, December 07, 2000 1:06
Errol,
According to my chart the the K-Jectronic 6.9 Litre ( 0580 254 975 ) pumps
3.6
litres per min at zero restriction or 3.1 Litres per min at 40 psi which
should
be enough for 455bhp or 340kw.
Andrew Smith
Errol Smith wrote:
> Pete,
> Do you have a contact that can give flow/max pressure details for Bosch
> electric injection pumps? I have a Mercedes 6.9 Litre electronic
injection
> pump, and Im dammed if I can find any flow pressure data?
> Cheers
> Feral Errol
> www.Datrats.com.au
>
> ----------
> From: Pete & Kath Liebig <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: RE: efi fuel lines for 1600
> Date: Wednesday, December 06, 2000 22:19
>
> Ryan,
>
> Just use the Bundy tube like the brake hard lines are (but bigger). You
> only
> need stuff around 5mm ID. No smaller though. Don't let the "sic mates"
try
> to tell you that you need huge fuel lines. It's not true. The output
> fitting
> on a Bosch VL turbo pump (008) has an ID of slightly less than 5mm, so
it's
> not much use going bigger than this!
>
> You need much larger stuff leading into the pump though. Just match it to
> the size of the fittings on the pump.
>
> Make sure you use the proper (expensive) EFI hose for everything after
the
> fuel pump - it is rated to huge pressures - and needs to be - those pumps
> can deliver over 100psi.
>
> PL
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of ryan chalmers
> Sent: Wednesday, 6 December 2000 19:26
> To: [EMAIL PROTECTED]
> Subject: efi fuel lines for 1600
>
> Guys I am purchasing an EFI setup for my L20 in my 1600 and figure I will
> have to upgrade my fuel line and add a return line as I don't have one.
> What size, type do I use, can I do this my self? how much would it cost
for
> a shop to do it?? Has anyone else done this I guess so as of fj/sr/z18
> would require this modification. Any help muchly appreciated
> Ryan
>
____________________________________________________________________________
>
> _________
> Get more from the Web. FREE MSN Explorer download :
> http://explorer.msn.com
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
