Errol,
I got this info from Zoom mag vol aug/sept 1997 which is copied from the
Gregory's EFI and Engine Management manuals vol 1-3.Autronic engine management
software also have this info along with injector output.
Andrew Smith
Errol Smith wrote:
> Andrew,
> Where do get a copy of this chart as I have been searching for a chart of
> Bosch EFI pump specs and cannot find one on the web.
> Cheers
> Feral Errol
> www.Datrats.com.au
>
> ----------
> From: andrew smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: fi fuel lines for 1600
> Date: Thursday, December 07, 2000 1:06
>
> Errol,
> According to my chart the the K-Jectronic 6.9 Litre ( 0580 254 975 ) pumps
> 3.6
> litres per min at zero restriction or 3.1 Litres per min at 40 psi which
> should
> be enough for 455bhp or 340kw.
> Andrew Smith
>
> Errol Smith wrote:
>
> > Pete,
> > Do you have a contact that can give flow/max pressure details for Bosch
> > electric injection pumps? I have a Mercedes 6.9 Litre electronic
> injection
> > pump, and Im dammed if I can find any flow pressure data?
> > Cheers
> > Feral Errol
> > www.Datrats.com.au
> >
> > ----------
> > From: Pete & Kath Liebig <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: RE: efi fuel lines for 1600
> > Date: Wednesday, December 06, 2000 22:19
> >
> > Ryan,
> >
> > Just use the Bundy tube like the brake hard lines are (but bigger). You
> > only
> > need stuff around 5mm ID. No smaller though. Don't let the "sic mates"
> try
> > to tell you that you need huge fuel lines. It's not true. The output
> > fitting
> > on a Bosch VL turbo pump (008) has an ID of slightly less than 5mm, so
> it's
> > not much use going bigger than this!
> >
> > You need much larger stuff leading into the pump though. Just match it to
> > the size of the fittings on the pump.
> >
> > Make sure you use the proper (expensive) EFI hose for everything after
> the
> > fuel pump - it is rated to huge pressures - and needs to be - those pumps
> > can deliver over 100psi.
> >
> > PL
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of ryan chalmers
> > Sent: Wednesday, 6 December 2000 19:26
> > To: [EMAIL PROTECTED]
> > Subject: efi fuel lines for 1600
> >
> > Guys I am purchasing an EFI setup for my L20 in my 1600 and figure I will
> > have to upgrade my fuel line and add a return line as I don't have one.
> > What size, type do I use, can I do this my self? how much would it cost
> for
> > a shop to do it?? Has anyone else done this I guess so as of fj/sr/z18
> > would require this modification. Any help muchly appreciated
> > Ryan
> >
> ____________________________________________________________________________
>
> >
> > _________
> > Get more from the Web. FREE MSN Explorer download :
> > http://explorer.msn.com
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
