RE: L20B in a 120Y

[Terry Rudd]

The C210 box is 130mm longer than the Doggy box and it does use the same front yoke. Give the doggy a try, you'll only break it by abusing it as Errol says.   Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Saturday, 17 February 2001 6:39 To: [EMAIL PROTECTED] Subject: Re: L20B in a 120Y don't suppose the C210 box is the same length is it? cause I have allready had the tailshaft made up for the dogleg 5spd :(   do they both use the same front yolk on the tailshaft? (the dogleg and the C210 I mean)   Dave   PS. Betcha I can't find a 1600 wagon diff hehe, I can never find datsun parts around my area ----- Original Message ----- From: Errol Smith To: [EMAIL PROTECTED] Sent: Saturday, February 17, 2001 5:38 AM Subject: RE: L20B in a 120Y Dave, Use a 1600 wagon diff as they are stronger and more ratios are available for them. The dogleg 5 speed is strong enough for race use with care but for drags I would use a 71B box (C210 etc)   Cheers Feral Errol mailto:[EMAIL PROTECTED] http://www.datrats.com.au/   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Saturday, February 17, 2001 1:09 AM To: OZDAT Subject: L20B in a 120Y     ok I'm dropping an L20 into my 120y this weekend I still haven't decided which engine to buy, there's 2 I'm looking at, one stocko and one worked.   my question is this, even if I pick the stock one it won't stay that way for long, so I've been thinking about diffs, I have a SSS Stanza diff I was going to use, I want to use this diff due to the low ratio gears (4.3) but are these diffs strong enough to handle a fairly stout L20?? It's a a stroker, got a Z22 crank but unsure of rods and pistons (although I know they're forgies) 76 degree cam and twin 45's? If the diff isn't up to this task what is a diff that is? and preferably something that allready has low gears or is easy enough to find replacement low ratio gears for it, I wanna use around 4.1 at the very tallest cause it's gunna see the 1/4 a fair bit.   second question is gearbox, I have a SSS Stanza dogleg 5spd I was planning on using, will this box be strong enough?   thanks in advance Dave --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------