After looking at mine the other day........
Wouldn't you just bend the rod with the float on it?????

Andy.


>From: Bruce Ferguson <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Re: Temperature Senders
>Date: Wed, 18 Apr 2001 21:28:31 -0700 (PDT)
>
>Nicholas,
>
>I think you will find it is a faulty sender, comparing
>Stanza and 200B ones will not work as they have
>different resistance.
>
>I had the same problem and after doing exactly what
>you have done, didn't get a result, but replacing the
>sender with the type that is supposed to be fitted ex
>factory, ended up working like a dream. They can be
>difficult to replace but I think the Stanza one is
>like the 1600 one ???? A threaded collar is used to
>seat the factory one into the housing.
>
>If you are serious about monitoring your temp, do so
>by using a good quality guage and not the factory
>setup. You could do as I did and use a full polution
>control 200B thermostat housing (has 3 openings for a
>variety of pollution sensors) use 1 for the factory
>guage, 1 for the aftermarket guage and the last I used
>a brass plug to block it up.
>
>Interestingly I have a similar problem with my fuel
>guage ... full = half. I have replaced the sender and
>dash units but to no avail, I would really like a fix
>on this if anyone has any ideas ???
>
>Regards
>
>Bruce
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Auctions - buy the things you want at great prices
>http://auctions.yahoo.com/
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to