Terry
I fitted it before i read you last post my pc was playing up, I have
actually put it on my L18 as the L20B is still on the workshop floor. I did
not check the jet size but I'm prety sure they are standard as I unbolted the
carby from a cortina (2L) that an old lady had owned. I guessed that that
pipe was the vac pipe from looking at my other carby. I will adjust the
mixture now I know how to do it (thanks). What is the screw on the base on a
45 degree angle for? Also when you say direct to the dizzy do you mean to
the little round thingy on the dizzy or what ???
One last thing gees it make a difference from the crappy little hitachi carby
she takes off like a rocket, now I cant wait till I get my mild 2L in her he
he :-)
Thanks again
regards
Chris
> Chris,
>
> The little pipe that comes out the bottom of the carbie on the rocker
> cover side is the vac pipe (remember to run it direct to the dizzy with
> a DGAV) and the mixture screw is the one to the rear of the pipe. When
> you adjust the mixture, make sure you don't screw the mixture in to
> tightly (lean) as the thread is very fine - stop once you feel
> resistance and then screw it out until the idle doesn't increase any
> more (rich). They are quite sensitive to mixture adjustment even on the
> rich side so it's easy to set is right. Before you fit the carbie, it
> would also be a good idea to carefully take the top cover off and check
> the primary and secondary jet sizes so you know what you have in case
> you have to get bigger ones. Around 140 primary and 160 secondary are
> ball park for a L20B.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Chris
> Williams Sent: Friday, 15 June 2001 8:42
> To: [EMAIL PROTECTED]
> Subject: RE: Webbers Info
>
>
> Thanks again Terry
> I did get one to day and an adapter I am going to install it tomorow
> I
> think just with the water choke should be prety straght forward. One
> question thow do you know what the little pipe is for vacuum sensor
> maybe?
>
> Regards
>
> Chris.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
