The gas is inert and prevents contamination etc through exposure to air,
also better heat control I think.

I have used welders all my life, arc, mig and tig, and for home auto use I
would strongly suggest a mig.  Better welds, easier to use on thin metal and
you can also weld aluminium if you use aluminium wire (buy argoshield as
though, not the cheaper migshield)


Regards
Brad Hallett
http://www.powerup.com.au/~bhallett

http://www.datrats.com.au for the best in Nissan Motorsport Equipment

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson
Sent: Sunday, 18 November 2001 9:58 AM
To: [EMAIL PROTECTED]
Subject: Re: off topic : welding equipment


Thanks for the reply.
The mig i'm looking at doesn't require gas
http://www.cigweld.com.au/pages/images/product/welding/022.pdf

Sorry if this is a stupid question, but what is the gas for? and would the
above mentioned welder be appropriate for my needs?

Good idea re the tafe courses, thanks i'll give that a try.

cheers,
Adam

> I personally would buy a mig, but It really depends on how much/ what  you
> plan to do.
>
> here are my thoughts
>
> Mig is only really easier if you can get the settings right for the weld.
> Mig you usually need a gas, stick you dont' , ie mig has ongoing costs of
> bottle hire.
> The weld wire (mig) is cheaper than rods (stick) if you plan to do alot of
> welding.
> MIg usually doesnt produce a slag, stick depending on the rod ( and how
good
> you are) you spend more time with a chipping hammer that with the welder.
>
> I Could I recommend checking out your local tafe to see if youe run night
> time welding courses. I have just finished one cost about $250/per
semester.
> and if you get to know the teachers well, they ussally dont mind if you
> wander in on a different night there is a class and uses the gear, ( and
> probably even help)
>
> Cheers,
> Steve.



--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to