I dont know where you are, but in perth there is a small engineering firm that does alot of this sort of thing. The guy who runs it is a tool maker by trade but is able to do just about everything. The company is called Kabeen Engineering and its in Balcatta. The guys name is Garry, really nice bloke.
This might help Sandejas, Ignacio writes: > Professionally as in who?? > > -----Original Message----- > From: Brad Hallett [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 11, 2002 1:59 PM > To: [EMAIL PROTECTED] > Subject: RE: Brake Question > > > Get it done professionally if you haven't got the gear or experience. > Wouldn't cost a lot its just a matter of marking and drilling. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Sandejas, > Ignacio > Sent: Friday, 11 January 2002 12:33 PM > To: '[EMAIL PROTECTED]' > Subject: RE: Brake Question > > > Guys, > In regards to redrilling the blanks. Is that a home job? I'm under the > impression that if you aren't accurate you could have an unbalanced > rotor? Any tips on doing the job? > > Iggy Sandejas > Sydney Aust > Datsun 1600 FJ20t > > > -----Original Message----- > From: Brad Hallett [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 11, 2002 1:19 PM > To: [EMAIL PROTECTED] > Subject: RE: Brake Question > > > Tim > > Both the Verada and Tarago swap are good, but I would swing towards the > Verada as it is such a popular conversion there is no end of info on it. > New rotors from DBA are inexpensive and you can order blanks for a more > professional job. > > And lets not forget the old Chrysler Centura rotor if you are after a > cheap yet effective conversion > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Tim Heibloem > Sent: Friday, 11 January 2002 11:30 AM > To: [EMAIL PROTECTED] > Subject: Brake Question > > > hows it going fellas, > > just a quick question im sure someone will know the answer.. > > > at the moment i am running 240k Struts and rotors on my 510..with Toyota > > Hilux 4 Spot Callipers.. > > the calipers are great and reduced fade by a million times although i > would > further like to put some vented disks on my car to improve the pedal > feel > under load.. > > with out fabrication what are the best rotors to use? alot of people > use > Mitsubishi Verada Rotor, although im told that Toyota Tarago (the older > models) are a good swap, cheap and easily available.. > > what are your opinions on this? im leaning towards tarago as i would not > > need to do too much as far as getting the rotor redrilled to suit the > part > which attaches (with the wheel studs, i can't don't know its name)... > > thanks for your help fella's much appreciated > > tim > > _________________________________________________________________ > Join the world's largest e-mail service with MSN Hotmail. > http://www.hotmail.com > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] Send > submissions to [EMAIL PROTECTED] No unauthorised > redistribution of this email http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] Send > submissions to [EMAIL PROTECTED] No unauthorised > redistribution of this email http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
