Terry, These are straight from the Nissan competition tune up manual for the A10.
32010 W6600. 3.382 2.013 1.312 1 0.854 reverse 3.570 32010 W6610 3.657 2.177 1.419 1 0.852 reverse 3.860 The Australian delivery 5 speed was the 32010 W6600. Cheers Feral Errol -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Rudd Sent: Wednesday, 13 February 2002 11:31 PM To: [EMAIL PROTECTED] Subject: RE: Boot Release Ok Errol, These are different numbers to what i've got for PA10 boxes. Do you know what box these ratios are in? (any numbers) This could explain an oddball dog box I had in my Aussie SSS Stanza as the revs never matched the ratios quoted in the book but these look closer to what it would have had in it. Anyone still got a PA10 SSS book - just curious what's in it. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of E Smith Sent: Wednesday, 13 February 2002 7:16 PM To: [EMAIL PROTECTED] Subject: RE: Boot Release 3.382 2.013 1.312 1 0.854 Cheers Feral Errol -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Wednesday, 13 February 2002 4:50 PM To: [EMAIL PROTECTED] Subject: Re: Boot Release yeah I was after those ratio's too was about to start a new thread and ask I want them to try and work out what speed I've had the stanza upto, the speedo only goes upto 180 so I don't know haha ----- Original Message ----- From: "Richardson, Thomas Morgwn - RICTM002" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, February 13, 2002 3:08 PM Subject: RE: Boot Release > Hey Nick, you're pretty cluey about all things Stanza, do you know what the > ratios in the 5 speed SSS box are? > > Cheers, > > - Tom > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, 13 February 2002 2:26 PM > To: [EMAIL PROTECTED] > Subject: Re: Boot Release > > > Hey, you are freaking me out! > > I have a remote boot/fuel filler release from a SSS Stanza at home I got it > from a U-Pull wrecker along with the Gearbox. I also saw but did not take a GL > Stanza Boot only release. > Both square headlight models. > > Perhaps it was an aftermarket job, but it fits like it was designed for that > installation.. > > I also have a Bluebird TRX one. > > My car is about as classy as a $2 Hooker so I haven't installed these niceties > yet. > Nick > > > > > From: "David Costello" <[EMAIL PROTECTED]> > > Subject: Re: Boot Release > > Date: 13/02/2002 12:55:42 > > To: <[EMAIL PROTECTED]> > > > > I've owned 4 stanza's all of which were SSS and later square headlight models > and never seen one with mechanical boot or fuel filler release ?? > > > > Dave > > ----- Original Message ----- > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Sent: Wednesday, February 13, 2002 12:22 PM > > Subject: Re: Boot Release > > > > > > SSS and other late model Stanzas have mechanical release boot AND fuel > filler flap. Bolts straight in. > > Bluebird also has remote mechanical release, cheaper and easier to get. > Harder to hook up though. > > > > What do you do if the solenoid, or linkage, fails and you have no boot > lock? > > > > Nick > > > > > > From: "David Costello" <[EMAIL PROTECTED]> > > > Subject: Boot Release > > > Date: 13/02/2002 12:01:40 > > > To: "Ozdat Mailing List" <[EMAIL PROTECTED]> > > > > > > I wanna hook up either an electrical or mechanical in cabin boot release > in my Stanza, via either a switch/button on the dash or a lever down beside the > seat, and remove the external bootlock all together, what model car should I be > grabbing the parts from? > > > > > > Dave > > > > > > > > > > This message was sent through MyMail http://www.mymail.com.au > > > > > > > > > > > -------------------------------------------------------------------------- ---- > > > > > > I wanna hook up either an electrical or mechanical in cabin boot release in > my Stanza, via either a switch/button on the dash or a lever down beside the > seat, and remove the external bootlock all together, what model car should I be > grabbing the parts from? > > > > Dave > > > > > > This message was sent through MyMail http://www.mymail.com.au > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
