http://www.users.bigpond.net.au/fj20t/mount.jpg
here's a link, i'll take more if this pic isn't all that helpful ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 16, 2002 8:31 PM Subject: RE: HELP please > Adam, > I don't know the details of a Maddat kit as i've never used one but what > engine mounts are you supposed to use with it? The SSS kit uses stock 1600 > mounts. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > Sent: Saturday, 16 February 2002 8:19 PM > To: [EMAIL PROTECTED] > Subject: HELP please > > > Hi everyone, > > I've just been 'trying' to drop my sr into my 1600. I'm having a little > difficulty tho, it seems that the X member and engine mounts don't line up > on side. I have a maddat fitting kit and brand spanking new engine mounts, > so the X member is reversed etc... > > When I bolt up the passenger side, the driver side mount is atleast 50mm out > of whack. If i were to put spacers in there then the holes would line up A > ok, so what am i missing? Should i have put spacers in before putting the > engine mounts on? I'm at a loss, all help very much appreciated. > > cheers, > Adam > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
