I dont want to have to change the head. Could i put the manifold and carby that came off the A87 head straight onto the W53 head? It will only be for a short time as a power boost, so i don't want to go screwing around with heads etc..
--- message from "damien cm" <[EMAIL PROTECTED]> attached: _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com _____________________________________________________________ Run a small business? Then you need professional email like [EMAIL PROTECTED] from Everyone.net http://www.everyone.net?tag --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
--- Begin Message --->From: Mark Firman <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: 45 sidedraught weber >Date: Thu, 21 Mar 2002 12:18:18 -0800 (PST) > >Hi List, > >It seems i will need an engineers cert to put the L20 in my 1600, so in the meantime while i save money i would like to put the 45mm sidedraught weber that came off the L20B onto my L16 for a bit more power. >The L20 has an A87 head and my L16 has a W53 head, will i need a new manifold? or could i just slap it on seeing as it will only be for a short time? >Also, is it difficult/expensive to get the jetting changed on the weber to suit the smaller capacity engine? I really have no idea about this so any help would be great. > >Thanks, > >Mark. > >_____________________________________________________________ >Get Your free Ozdat Email Account >---> http://www.ozdat.com > >_____________________________________________________________ >Run a small business? Then you need professional email like [EMAIL PROTECTED] from Everyone.net http://www.everyone.net?tag > >--membersozdat------------------------------------------------------- >OZDAT Mailing List Please Note:- >Send (un)subscribe requests to [EMAIL PROTECTED] >Send submissions to [EMAIL PROTECTED] >No unauthorised redistribution of this email >http://www.ozdat.com/ozdatonline/index.htm >http://www.ozdat.com/ozdatonline/listindex.html >http://www.mail-archive.com/[email protected]/ >---------------------------------------------------------------------Put on the W53 head, port match the manifold, and slap her on!!!!!!!!
Then worry about jets. I have Lynx crossover manifold and 45 weber on L20 and it goes sweet!!!
MSN Photos is the easiest way to share and print your photos: Click Here
--- End Message ---
