Mark, To make it run properly just about everything on this list Probable: venturis (chokes) auxiliary venturis main jets emulsion tubes air corrector jets
Possible: idle jets accelerator pump jets ram tubes I've probably missed a part or two but you get the idea. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Firman Sent: Sunday, 24 March 2002 10:41 AM To: [EMAIL PROTECTED] Subject: RE: 45 sidedraught weber Thanks terry, i guess i will just give it a go then. Also, can anyone tell me what needs to be changed in the carby for it to run properly on the smaller capacity engine? Can this just be fiddled with once i have the carby on the smaller engine? (2.0L-1.6L) Any help would be great. Mark. --- "Terry Rudd" <[EMAIL PROTECTED]> wrote: >Mark, > >The bolt pattern on both heads is the same so no problem there. Depending on >what the manifold runner diameter is you may have a mismatch with the W53 >head. A few mm either way wont hurt too much, It will run but how well and >efficiently fuel wise only time will tell. > >regards >Terry > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]]On Behalf Of Mark Firman >Sent: Friday, 22 March 2002 7:18 AM >To: [EMAIL PROTECTED] >Subject: 45 sidedraught weber > > >Hi List, > >It seems i will need an engineers cert to put the L20 in my 1600, so in the >meantime while i save money i would like to put the 45mm sidedraught weber >that came off the L20B onto my L16 for a bit more power. >The L20 has an A87 head and my L16 has a W53 head, will i need a new >manifold? or could i just slap it on seeing as it will only be for a short >time? >Also, is it difficult/expensive to get the jetting changed on the weber to >suit the smaller capacity engine? I really have no idea about this so any >help would be great. > >Thanks, > >Mark. > >_____________________________________________________________ >Get Your free Ozdat Email Account >---> http://www.ozdat.com > >_____________________________________________________________ >Run a small business? Then you need professional email like [EMAIL PROTECTED] >from Everyone.net http://www.everyone.net?tag > > _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com _____________________________________________________________ Run a small business? Then you need professional email like [EMAIL PROTECTED] from Everyone.net http://www.everyone.net?tag --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
