Mark, The bolt pattern on both heads is the same so no problem there. Depending on what the manifold runner diameter is you may have a mismatch with the W53 head. A few mm either way wont hurt too much, It will run but how well and efficiently fuel wise only time will tell.
regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Firman Sent: Friday, 22 March 2002 7:18 AM To: [EMAIL PROTECTED] Subject: 45 sidedraught weber Hi List, It seems i will need an engineers cert to put the L20 in my 1600, so in the meantime while i save money i would like to put the 45mm sidedraught weber that came off the L20B onto my L16 for a bit more power. The L20 has an A87 head and my L16 has a W53 head, will i need a new manifold? or could i just slap it on seeing as it will only be for a short time? Also, is it difficult/expensive to get the jetting changed on the weber to suit the smaller capacity engine? I really have no idea about this so any help would be great. Thanks, Mark. _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com _____________________________________________________________ Run a small business? Then you need professional email like [EMAIL PROTECTED] from Everyone.net http://www.everyone.net?tag --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
