>Hello membersozdat, > > I got the 260z today, and was going over it fixing up a couple of > things, and I have some questions. First, there are a couple of > holes in the firewall on the passengers side that look like they > should have hoses or something going through them, but they are > empty, what should be in them? They are about carby height. Also the > little movable light under the hood, what sort of switch is that > meant to have? Can someone also recommend any particular brake pads, > mine need replacing soon, I dont really want anything that is going > to root the rotors.
The two holes in the f/wall are for the aircon pipes. If you have no aircon there's a special elongated rubber piece that covers the holes and a metal plate that holds it in place. The under-hood inspection light should have the on/off switch at the opposite end of the inspection light body to the lens. It's just a simple toggle switch, but not uncommon to find it broken. These lights are also common to other early Nissan's like 240C and 260C so not hard to find a good one. I found standard Bendix pads worked well with the stock calipers/rotors, but any engine performance upgrade will need something better (eg Metal Kings). --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
