The holes sound like the right place for those used for aircon pipes, or alternatively for LHD models steering shaft - perhaps a bit high for this. ----- Original Message ----- From: "Steve Lamb" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, 2 April 2002 18:48 PM Subject: Re: Z questions
> >Hello membersozdat, > > > > I got the 260z today, and was going over it fixing up a couple of > > things, and I have some questions. First, there are a couple of > > holes in the firewall on the passengers side that look like they > > should have hoses or something going through them, but they are > > empty, what should be in them? They are about carby height. Also the > > little movable light under the hood, what sort of switch is that > > meant to have? Can someone also recommend any particular brake pads, > > mine need replacing soon, I dont really want anything that is going > > to root the rotors. > > The two holes in the f/wall are for the aircon pipes. If you have no > aircon there's a special elongated rubber piece that covers the holes > and a metal plate that holds it in place. > > The under-hood inspection light should have the on/off switch at the > opposite end of the inspection light body to the lens. It's just a > simple toggle switch, but not uncommon to find it broken. These > lights are also common to other early Nissan's like 240C and 260C so > not hard to find a good one. > > I found standard Bendix pads worked well with the stock > calipers/rotors, but any engine performance upgrade will need > something better (eg Metal Kings). > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
