|
Sorry, my apologies. I don't know why I said
Melbourne!
You may be correct about the S15, however from what
I was told - they tend to be a bit weaker in the bottom end!
Info based only on what I've been
told.
----- Original Message -----
Sent: Wednesday, April 24, 2002 2:51
PM
Subject: Re: SR20 going into 1600-advice
wanted!!
Maddat are in Adelaide, http://www.maddat.cjb.net for pricing. I
get my
exhausts and other stuff done there and can vouch for the
workmanship.
The S15 engines aren't weaker in any respect but the
gearboxes can take
less punishment due to the narrower dimensions
nessecary to fit the
extra ratio in. S13 is probably the best bet because
S14 engines are
pretty expensive!
You can fit just practically any
fuel & ignition computer to an SR20.
Most people go for Haltech or
Wolf 3D because of the good compromise
between features and
price.
- Tom
Mark O'Conner wrote:
> Hi
Damien,
>
> From a fellow in the process SR20 fitter, my research
has found Stuart
> Wilkins Rally (Sydney) to be the most tried and
tested & hence most
> reliable. However I believe MadDat in Melb
also do a kit.
>
> I think there is also someone else who does a
cheaer version of the
> kit but can't recall the name - i can let you
know when I remember.
>
> Careful with the S15 motor - reports
have it that they tend to be a
> little weaker when put under pressure.
S14 probably better way to go.
>
> I considered S15 & 6 speed
box but found the box to be a bit weak also
> and poor ratio's. Hence
S14 motor & Box.
>
> I am dealing with SSS Automotive in
Sydney. Speak to Jeff or Joe.
>
> Comp. - Up to you! depends how
much money you want to spend. I am
> going HKS F-con V (big
$$$)
>
> Hope that gives you some clues.
>
>
Mark
>
> ----- Original Message
-----
>
> * From:* damien cm <mailto:[EMAIL PROTECTED]>
>
>
* To:* [EMAIL PROTECTED]
>
<mailto:[EMAIL PROTECTED]>
>
>
* Sent:* Wednesday, April 24, 2002 1:12
PM
>
> * Subject:* SR20 going into
1600-advice wanted!!
>
>
> Hey
all,
>
> I am putting a SR20 into a 1600.
The project officially starts
> today, and I
want it completed by the start of
Winter.
>
> Who knows of the cheapest
conversion kit available? It must have
> the
crossmember, gearbox crossmember, modified drag link,
and
> custom sway bar. Any
reccomendations??????
>
> I need a SR20
motor and gearbox with all the miscelanious parts.
I
> want a S14 or S15 motor with variable valve
timing. Who should I
> contact for good product,
service and price????
>
> What computer
should I use, and where can I get it for a
good
>
price????
>
> I live in
ACT.
>
> Any help appreciated, as it will
be needed!!!!!
>
>
Thankyou,
>
>
Damien.
>
>
>
------------------------------------------------------------------------
>
Join the world's largest e-mail service with MSN Hotmail.
Click
> Here <http://g.msn.com/1HM101201/44>
>
>
--membersozdat-------------------------------------------------------
>
OZDAT Mailing List Please Note:-
> Send
(un)subscribe requests to [EMAIL PROTECTED]
>
Send submissions to [EMAIL PROTECTED]
>
No unauthorised redistribution of this email
>
http://www.ozdat.com/ozdatonline/index.htm
>
http://www.ozdat.com/ozdatonline/listindex.html
>
http://www.mail-archive.com/[email protected]/
>
---------------------------------------------------------------------
>
>
>
--membersozdat-------------------------------------------------------
>
OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
>
Send submissions to [EMAIL PROTECTED]
>
No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
>
http://www.ozdat.com/ozdatonline/listindex.html
>
http://www.mail-archive.com/[email protected]/
>
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT
Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send
submissions to [EMAIL PROTECTED]
No
unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
