Remember pete and trace from the list were developing cas operated waste spark system that had some advance control.I dont know if he had it finalised using a cas yet.
Zac Campbell wrote: > hey, people have used an electronic dizzy as a trigger for an ignition > computer before. check the archives. > haltech make a stand alone ignition computer. perhaps you could use that. > > zac > > ----- Original Message ----- > From: "Chris Simpson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, May 25, 2002 9:11 PM > Subject: L20 dizzy > > > > > Listers, > > > > Does any one know of any electronic ignition set ups that can be used to > > get rid of the dizzy all together. A similar set up to the SR20DET ones > > with a sensor then the ability to run 4 coils. > > > > There are electronic ign kits to run 4 coild, but im no sure about sorting > > out something to bolt to where the dizzy is? Or would it be better to run > > a "chopper" wheel off the crank? > > > > Any idea's are welcomed. I figure that its easier to set something like > > this up now rather than once the motor is back in the car. > > > > Cheers > > > > Chris > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
