Wouldn't it just be easier (and probably cheaper) to fit a FJ20 turbo gearbox?
For the clutch, I would try sourcing a beefier pressure plate and using the stock 225mm friction plate Hope this helps.. - Tom Pete Parnell wrote: > Hi all, back again for some more info. > > I will be soon rebuilding my Z18ET gearbox (new bearing and second > gear synchro). Can anyone offer any help on this subject, mainly > with sourcing the correct synchros, bearings etc? > > > > Also I use an R63 clutch (260Z) which doesn't hold at 12psi boost. > Are there any cheap/factory clutch options that will fit? > > > > I also plan to lighten the flywheel by 30%. Any comments? > > > > Pete. > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
