sounds like you are trying to use the same booster that I did!! Mistake #1!! :) but it can be fitted. I used a spacer inbetween the firewall and the booster. I'm going to get a proper spacer made up however, probably a 200b booster spacer machined down. Using the spacer, the rod would still reach the pedal (with adjustment). From memory the spacer was only really about 8-10mm.
zac > BlankHELP! > Can anybody on the list prehaps enlighten me re the following: > > I tried to fit up a Datsun Sunny Brake Boster on the weekend. > > Problem: The booster will not sit hard up against the fire wall - it > fowls on the top right nut that fixes the steering column assembly > welded to the fire wall. > > The Booster also hits the edge of the clutch master > cylinder. > > Has anybody else come across this problem? What can be done to rectify > it? > > I could put a spacer plate on the booster and lengthen the studs through > the fire wall or move the steering column bolt lower, or tap in the area > at the back of the booster to allow for the nut and flatten the side of > he booster to clear the clutch master. > > Any ideas or help appreciated! > > Mark > > ---------------------------------------------------------------------
