damn....i thort it was an excuse to rip out the welder and have some fun.....yeah someone else told me its pretty normal to have some movement...just when I take off slowly you can hear it take up the slack and a small *clunk* is made...oh well
-----Original Message----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Wed, 5 Jun 2002 22:01:07 +1000 Subject: RE: diff Ben, It's very normal to have a bit of slack - called backlash and a typical datto diff the spec is 008" - 012" and that translates into some movement in the shaft - 3-5 degrees isn't real much. If it doesn't clunk or bang about I wouldn't worry too much about it at this stage. Keep and eye on it over a few more months and see if it's getting worse. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ben Sent: Thursday, 6 June 2002 9:42 AM To: [EMAIL PROTECTED] Subject: diff we rebuild my H190 about 6 months ago, and i havent really given it much of a hard time since then, but now it seems you can turn the tailshaft about 3-5 degrees, before it 'takes up the slack' and turns the wheel.....does this sound like the pin has worn and is 'slopping' around??? or is that usual for a diff to have a bit of slack?? --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
