Nat, Good to hear you're a runner again - always happy to help.
Indeed, the ignition feed wires go to the positive side of the coil, as does the start feed wire. (I did tell you how to check that your ignitions feed were OK.) It sounds like you've learnt a bit about ignition systems in the process so you'll find a problem in the future pretty easily - IMHO fixing it yourself is a nicer feeling than taking it to an auto spark and getting nailed in the hip pocket and you don't learn much that way. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of nat P. Sent: Tuesday, 9 July 2002 2:13 AM To: [EMAIL PROTECTED] Subject: RE: Wiring for wiper 200B switch into a 1600! Victory!!!!!!!!!!!!!!!!! I found the prob. The wires which go from the pos side go (in the end!) back to the ignition! SO I looked up the wiring diagram and found which wire was still intact and which was not! I then ran a new wire to fix the prob! Just proves that if you sleep on it, the answer is always there BUT sometimes you/I get so worked up over it all that I/we miss it!!!!!!!!! YYYYYYYYYYYEEEEEEEEHHHHHHHHHH!!!!!!! Thanks for all your help anway Terry!! I'm still waiting on a mate to copy the wiring diagrams for the 200B for you!(he's a slack bastard!!) Cheers NAT --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
