I guess the engine sits in slightly different positions depending on the design of the engine mounts, some fj's seem to be mounted further back than others. This would only affect the clutch resevoir not brake resevoir positions i think. Dave, the 180b booster and nabco cylinder does fit without the resevoirs touching the manifold but only just and wouldn't pass engineers certificate on this car, maybe your engine sits a little higher than this one. It does have a custom sump so maybe it is able to sit lower. I have looked into the urvan master(thanks Terry) and have decided that the best option would be to find some of the resevoir caps off one and use them on a 180b 7/8" bore cylinder. That way I can mount resevoirs remotely and easily clear manifold. Also the urvan cylinder is only 20.64mm(from memory looking at book) which I don't think will have as good a displacement of fluid for the brake setup i have.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Rudd Sent: Saturday, 31 August 2002 6:51 AM To: [EMAIL PROTECTED] Subject: RE: Booster m/cyl for fj20et Dave, You must nearly have the short intake runner version of the FJ engine or something I don't know about. Mine is a long runner DR30 version, and with that one if you can get a normal clutch reservoir in there it beats me how. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Hirst Sent: Friday, 30 August 2002 8:27 AM To: '[EMAIL PROTECTED]' Subject: RE: Booster m/cyl for fj20et Rohan I dont run a remote resevoir on my FJ 1600, you can get them in without having to run one... most people dont but it can be done. Mines using a datsun booster and resevoir. Cheers Dave > ---------- > From: Rohan > Reply To: [EMAIL PROTECTED] > Sent: Thursday, 29 August 2002 5:00 PM > To: [EMAIL PROTECTED] > Subject: Booster m/cyl for fj20et > > Just wondering what fj20et people are running in the way of a brake master > and booster with remote resevoirs(to clear manifold) in their > 510's...Thanks. > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
