|
Nice spotting of the switches, I have just measured
the clutch plate, it is approximately 225mm from end to end and the flywheel
measures around 285mm.
Thanks alot, if we come to some form of conclusion
ill have to ring the guy and confront him will all this information
:)
thanx
jarrod
----- Original Message -----
Sent: Sunday, September 08, 2002 1:36
AM
Subject: RE: Calling gearbox
identification specialists :)
I've
had another look at the pics of that box, funny how you see things that you
missed the first time round. The shifter doesn't tell me that it's not an FJ
box, what does though is the switches on the drivers side. It has all 3
switches with connectors attached - i.e. neutral, top gear and reverse lights.
Now most engines with EFI and therefore an ECU, don't have top gear and
neutral switches as these are used to control advance on a manual dizzy and
they are (I wont say only) nearly always only required with a carbie
engine, and certainly they aren't used on a FJt. Also the clutch and flywheel
doesn't look like any FJt items that I've ever seen, but I wont say that I
know for sure what it's off though.
What's the diameter of the clutch plate? There could be a few clues
there?
regards
Terry
by the shifter pics, to me
it's looks like a stumpy skyline
box,
but when you seen the complete box it looks
like a CA20 5sp.
these are only guesses though
it's definetly not a CA18det box, doesn't have
the large rectangle shifter.
Heath
----- Original Message -----
Sent: Friday, September 06, 2002 9:49
AM
Subject: Calling gearbox
identification specialists :)
G'day,
Ive been search for an FJ20ET gearbox for
awhile, and i came across one for sale in the local classified paper, and
naturally i rang up, talked to the guy, he seemed decent told me abit bout
the history; it was recently used on a CA18DET but never ran due to an
unfinished project, and before that it was at the wreckors from a S12
Silvia. It sounded all good, i made the purchase and went
off.
It came with a clutch and flywheel. As soon
as i get home, i took the flywheel, and attempted to fit it onto my fj20
block. It wouldn't fit on at all. The holes were slightly smaller then the
standard FJ20 flywheel bolts, and also, the holes do not align perfectly.
At this point im thinking, have i been mislead? Or are there different
sized flywheels for different FJ20's. Eg. my engine is a skyline one, and
this flywheel from a silvia version.
So much, to my confusion ive taken some pics and hopefully some
gearbox guru can put a possitive identification on this box i've just
bought.
Any help will be appreciated greatly.
Jarrod :|
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
