Ben,
Ring the manufacturer.
Kris.
----- Original Message -----
From: "Ben C" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, October 27, 2002 10:58 PM
Subject: Re: simmons
> i measured it all up.....goign off what i have now.....10" could just fit
> i have 6.5" FWD offset wheels at the moment....and there is a 60mm gap
> between the wheel and the strut on the back.....and a 40mm gap between the
> front of the rim and the inner guard (i lipped my rear guards)....which is
> why ill need such a narrow tyre for such a wide rim....
>
> yeah furys car had 4" rear guards....and 12" rims....and the rim sits
about
> 1-1.5" in from the edge of the guard.....
>
> anyway....ill still go at least 8" wide...but back to my original
> question.....how much does it cost to buy just the rim???
>
> ----- Original Message -----
> From: "Chris Simpson" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, October 27, 2002 7:58 PM
> Subject: Re: simmons
>
>
> > Coz 9" rims will mean that you'll have to have your car at stock height
to
> > clear every thing with the right offset.
> >
> > George Fury's car had mammoth flares on it, like about 4" wider each
side
> > and the suspension was set up for it.
> >
> > If you want to do it thats fine, but i think you'll find it'll handle
like
> a
> > pig and look pretty average at standard height aswell
> >
> > Let us know hoe it goes thou.
> >
> > Chris S
> > ----- Original Message -----
> > From: "Ben C" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Sunday, October 27, 2002 8:17 AM
> > Subject: Re: simmons
> >
> >
> > > why not have 9" if i can fit them??
> > >
> > > the fury bluebird ran 12" on the back!!!
> > >
> > > anyway....no-one has answered my question....any idea on the price of
> the
> > rim section??
> > >
> > > -----Original Message-----
> > > From: "Chris Simpson" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Date: Sat, 26 Oct 2002 18:15:15 +0800
> > > Subject: Re: simmons
> > >
> > > 15x7 is plently big enough for any tyre you want to put on the back of
a
> > > datto. If you dont think that you can get good grip out of a 215 tyre
> > then
> > > your buying cheapo tyres.
> > >
> > > A mate of mine has a FJ20 race car with race/road tyres on it and it
get
> > up
> > > and goes with minimal fuss
> > >
> > > I'd seriously rethink the 9" idea, they are just too big
> > >
> > > Chris S
> > > ----- Original Message -----
> > > From: "Zac Campbell" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Saturday, October 26, 2002 4:23 PM
> > > Subject: Re: simmons
> > >
> > >
> > > > you want a 9 inch rim on the back? just how much rubber do you think
> you
> > > can
> > > > fit under there??!? :)
> > > >
> > > > ----- Original Message -----
> > > > From: "Ben C" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Saturday, October 26, 2002 5:28 PM
> > > > Subject: simmons
> > > >
> > > >
> > > > > swapping my alloys for some B45 simmons soon.. only
15x6.5....after
> > > doing
> > > > some measuring ive found i can fit 7.5" on the front and 9" on the
> > > > back.....anyone know how much it would cost just to buy the rims,
> since
> > i
> > > > already have the centre...or i might even be able to use the front
or
> > back
> > > > of the rim that is on them...i know i should just ask simmons....but
> it
> > a
> > > > saturday nite :)
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/membersozdat@;datascribe.com.au/
---------------------------------------------------------------------
