James
You should get a wheel alignment. My guess is that your castor is all wrong
and unfortunately unless u get adjustable castor rods (highly recommended)
theres not a lot u can do if it still rubs after the alignment. These
adjustable rods pull the whole strut assembly forward. Mine are adjusted so
far forward that I had to trim off the edge of the mudguard just behind the
bumper bar but that is a bit extreme. Alternatively I would also check the
rubber bushes in the castor rods to make sure they are not chopped out and
letting the strut/wheel move back.
Cheers
Mick
----- Original Message -----
From: "james wade" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 30, 2002 7:09 PM
Subject: RE: TRX rims dont fit (still!!!)


> And I found that only the drivers side wheel hit when I was turning so
> im thinking its wheel alignment. -James
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:membersozdat_owner@;datascribe.com.au] On Behalf Of james wade
> Sent: Wednesday, 30 October 2002 7:25 PM
> To: [EMAIL PROTECTED]
> Subject: RE: TRX rims dont fit (still!!!)
>
> Ok cool, im putting on new struts (240s) in 3 weeks... :)
>
> -James
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:membersozdat_owner@;datascribe.com.au] On Behalf Of Andrew
> Greenbury
> Sent: Wednesday, 30 October 2002 6:41 PM
> To: [EMAIL PROTECTED]
> Subject: Re: TRX rims dont fit (still!!!)
>
> Hi James,
>
> hmmm I dunno - I have trx rims with 195/50/15s and I dont have
> this problem (I did though when I had the 60 series on as did
> yourself :) Perhaps its to do with the struts - I have 240K struts
> which increase the track in the order of 10mm??
>
> Andrew
>
> > Howdy Guys.
> >
> > I got the shop to swap the tyres over (no charge) for 195/50/15s, but
> > they still don't fit!!! Driving around and on most corners theyre ok,
> > but when I get to full steering lock it makes the buzzing noise of
> tyre
> > on underbody paint. Is this to be expected? It really wont bother me
> > that much I just wont do tight u-turns. but if there is something
> wrong
> > Id wanna get it fixed. Could it possibly be because the wheels are
> > slightly misaligned?
> >
> > Cheers.
> >
> > -James
> >
> > James Wade / underground electronic magazine
> > [EMAIL PROTECTED]
> >  <http://www.ugzine.com> www.ugzine.com
> > PO BOX 140
> > Kensington Park, SA 5068
> > t:+61 8 8262 2850
> > f:+61 8 8219 1070
> > m:+61 (0)421 846 630
> >
> >
>
>
>
>
>
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/membersozdat@;datascribe.com.au/
---------------------------------------------------------------------

Reply via email to