Terry, I imagine so but could you confirm for me a 7.5" rim on the front of a 1600 is a no-go, regardless of offset, spacers, hubs, ??
----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 01, 2002 9:51 PM Subject: RE: Wheel offsets :) > I take it you're not talking TRX Bluey mags. LX Bluey etc are actually 6" > wide (TRX are 5.5") and LX mags have slightly more backspace (~5") which > results in around 8mm different offset to TRX mags and you are correct as > they will only fit 200B hubs with spacers, but spacers are illegal in Aus > unless OEM. Early 200B (10/77 - 7/79 DB1027 pads) hubs are wider by ~4mm > than late model 200B (DB1091 pads) so if your out by 12mm it sounds like you > could have late model 200B hubs - either are not much good with Bluey mags. > > regards > Terry (been there, done that) > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:membersozdat_owner@;datascribe.com.au]On Behalf Of cjw > Sent: Friday, 1 November 2002 4:16 PM > To: '[EMAIL PROTECTED]' > Subject: Wheel offsets :) > > > Hi there, > > I have 200B struts in my 1600 and I hve bluebird fir mags the > offset is out by 12mm. I was wondering if I can change my hubs for some > other 200B hubs with a different offset or do I just need to go for longer > studs and spacers? > > > > Regards > > > > Chris Williams > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@;datascribe.com.au/ ---------------------------------------------------------------------
