Terry,
Could i have that info too please. Was it set up for a standard motor,
L18SSS or something hotter?
Kris.
----- Original Message -----
From: "Terry Rudd" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 05, 2002 1:59 PM
Subject: RE: 32/36 downdraft recommendations...
> Andrew,
>
> Do you know what jets are in it at the moment. I've got a 32/36 out in the
> shed somewhere that's setup for an L18 which was real strong to around
7000
> rpm. I'll pull it apart for you and get the numbers for you if you're
really
> stuck for info. This one has something like 140 primary and 160 secondary
> but I can't remember what all the air bleed/correctors were and these are
> important to get the best out of the little weber.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:membersozdat_owner@;datascribe.com.au]On Behalf Of Andrew
> Greenbury
> Sent: Monday, 4 November 2002 2:57 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 32/36 downdraft recommendations...
>
>
> Gday Rich,
>
> Thanks for that - yeah I dont really want to take it to yet another
> place. I was hoping some people may have some
> recommendations for settings based on their experiences that I
> could then try out.
>
> Thanks
> Andrew
>
> > I got my 1600 (twin hitachis) tuned by DJ Carbies in Eltham, I've
> > also had our 240z tuned by him too, he knows heaps about carbies
> > and told me a 32/36 webber would be good. Anyway he tuned mine for
> > $70 including parts... he gives good advice, but maybe thats just
> > my experience.
> >
> > Rich
> > ----- Original Message -----
> > From: "GREENBURY, Andrew Robert" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Saturday, November 02, 2002 5:19 PM
> > Subject: 32/36 downdraft recommendations...
> >
> >
> > >
> > > Hi guys,
> > >
> > > Ive had my 32/36 webber tuned by a few "reputable" carby places over
the
> > > last few years before my resto, but i havent been convinced by their
> > > results. So I thought Id ask the people in the know if they have any
> > > recommendations for settings gained from experience??
> > >
> > > Its on a (as far as I know) standard L18 with extractors, S2
electronic
> > > ignition. I know nothing about webber tuning - is it just primary and
> > > secondary jets to play with on the downdraft?
> > >
> > > Thanks for any recommendations or advice,
> > >
> > > Andrew
> > >
> > >
> > >
> >
>
>
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/membersozdat@;datascribe.com.au/
---------------------------------------------------------------------
