Andrew,

Yeah it bolts up to the L20ET manifold so I'm assuming its a T3 manifold. 

James,

sounds good.. was thinking .48 sounds a little on the small side of 
things.
Thanks,

Dave


>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<

On 11/22/02, 6:59:08 PM, andrew smith <[EMAIL PROTECTED]> wrote 
regarding Re: T3/T4 for L28 cont'd:


> The turbo you mention would work fine and has plenty of scope for
> improvement.I'm curious does this bolt up to the L20et manifold as i 
thought
> they were t3 bolt pattern or has it been modified to suit t4 or is the
> turbine housing a t3.I have seen a sandwhich plate that bolts to the 
manifold
> between the turbo that can have a small external wastegate bolted to 
it.You
> can also sometimes weld an adapter for an external wastegate straight 
onto
> the manifold just depends on the quality of steel the manifold is made 
from
> or weld it straight onto the turbine housing.The new turbosmart 32mm 
external
> wastegate retails for around $500 and if you know someone who is an agent 
for
> them you can probably pick one up for about $150 less.If the manifold is 
a t3
> pattern then it would probably be easier to get an internal wastegated t3
> turbine housine with wastegate and actuator.

> David Andrews wrote:

> > G'day All,
> >
> > Just went and had a peer at the turbo I mentioned the other day.
> >
> > T04 AirResearch ( = Garrett ) compressor AR 0.6
> > ??? turbine AR 0.48
> >
> > The turbine housing is split pulse (ie two channels for input) and is NOT
> > integral wastegate. The bloke is selling it with a L20ET manifold, so if
> > this was going to work i'd need to get a mount for an external wastegate
> > set up, or another custom manifold.
> >
> > Oh and the core bit only had two holes so not water cooled i'm supposing.
> >
> > So, with an external wastegate would this turbo be ok for an L28 (with
> > mild cam)?
> > Thanks,
> >
> > Dave
> >


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to