Cameron, There are few different looms for early and late models (and various options, various models and markets etc). The early Jidaco 90 degree wiper motor is 4 plug, all the late models including Lucas are 6 plug at the wiper motor but fairly easy to convert.
The fuel gauge sender units are the same so you should be able to adjust the angles on the bar with the float to fix your gauge reading. The tank sending units are supposed to range from 0 to 100 ohms but from measuring 3 or 4 units pulled from tanks (various years) the actual values ranged from 0-84 to 0-120 which is why you get funny readings from just replacing the gauge or the sender from another car. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Cameron Stean Sent: Sunday, 15 December 2002 4:06 PM To: [EMAIL PROTECTED] Subject: Re: 1600 SSS quality ?? was My SSS pic I have found out the hard way with my SSS parts :/ first my wiper motor blew... had to convert to a Aust spec wiper motor, different plug, stock is a 6 plug? and a SSS is a 4... or either ither. and then my fuel sender unit has packed it in.... I put a Aust spec fuel sender unit in and I *think* the SSS unit has a different resistance.. as on a empty tank the guage shows 1/4 full ( I dont like running out of fuel in peak hour ) :/ Cameron --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
