Thanks guys just a thought Chris King ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, October 24, 2003 8:29 PM Subject: RE: Diff R160 --->R180
> The crown wheel ID on the R160 is 80 mm. On the R180, crown wheel ID is 92.5 > mm. > > If you made up an 80mm id ring with OD of 92.5 shrink fitted to the LSD you > could do it. You would have to do something with the carrier bearings as > well, as the r160 is narrower. All to much trouble I think. > > Cheers, > Feral Errol > Get Serious http://www.datrats.com.au/ > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Friday, October 24, 2003 5:21 PM > To: [EMAIL PROTECTED] > Subject: Re: Diff R160 --->R180 > > > > I think you may be able to fit the R160 LS centre to the R180 crown wheel. > Check if the bolt up pattern is the same. If it is, you would then need to > centre it very carefully, perhaps by turning up a ring with outside dia. > equal to the inside Dia. of the R180 and inside dia equal to the outside > size of the R160 LSD. Get it? > Use the ring as a guide when bolting up the LSD to the R180 crown wheel. > Perhaps even fix the ring permanently to the inside of the crown wheel and > make sure it cant come off. > Rick Clough > Ph: 03 5172 2670 > email: [EMAIL PROTECTED] > > ********************************************************************** > Any personal or sensitive information contained in this email and > attachments must be handled in accordance with the Victorian Information > Privacy Act 2000, the Health Records Act 2001 or the Privacy Act 1988 > (Commonwealth), as applicable. > > This email, including all attachments, is confidential. If you are not the > intended recipient, you must not disclose, distribute, copy or use the > information contained in this email or attachments. Any confidentiality or > privilege is not waived or lost because this email has been sent to you in > error. If you have received it in error, please let us know by reply > email, delete it from your system and destroy any copies. > ********************************************************************** > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
