Mk2 puscort seat blts bolt straight in ,no mods need (into a 69 shell). Weld up the front chassis rails along the bottom edge ,they split open. Also pays to seam wels around rear wheel inner arch's(under back seat)dig out all the seam goo thats been painted over and you will see big gaps,most are like this I have seen .weld it up and regoo them.
Also along the bottom edge of the rear inner wheel wells,the factory spot welds pop their too.. As for cutting the new hole,,if needed?,I havnt done a SR..But cut out the whole hole ,as in four straight lines,then weld it back in where it needs to be then add a strip of steel,,Then sand back the welds both sides and no one will know its been moved. Taking a 510 to steel is the only way to do it,,You will find rust you didnt know you have. I'm sure the roll of film I took of the 510 rust cutting ,, I took pic's but never got the film printed.I'll hunt it up........ Malcolm ----- Original Message ----- From: "Ryan Ottens" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 06, 2003 5:37 PM Subject: things to think about??? > hey guys, > well time has come. just bought my self an sr package. > and probs gonna get some body work done, and a respray. > whilst im at it, is there anything else i should think about whilst the body > will be stripped? > > even little things like getting brackets welded into the door pillars so i > can put in reclining seatbelts, welding up the whole for the gearbox and re > cutting it to suit the new gearbox. things like that? > > as some of yous have been through this before, i bet yous have come to do > something and gone, shit! I wish i would have done this before hand to make > things easier etc. its all those things id like to try and find out before > hand, rather than go 'oh shit' myself. > > cheers guys. > > ryan > > _________________________________________________________________ > E-mail just got a whole lot better. New ninemsn Premium. Click here > http://ninemsn.com.au/premium/landing.asp > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
