Hi, I am having a problem getting my CA18DET started since rerouting some of the engine wiring and relocating my battery to the boot.... I had it running well, but since tidying things up a bit i've struck a bit of a problem: basically if i turn the engine over by hand with the ignition on i get the injectors firing and spark - so in theory the engine should run, then if i turn the key to start - the engine turns over but i don't get spark or injectors firing! i tried disconnecting the wire to the start solenoid and then turned the engine over manually with the key held in the start position to try and simulate what is happening when the starter is cranking, and spark and injectors work fine! I am guessing it has something to do with voltage drop when the starter is cranking or something considering the battery is in the boot, but any other ideas or tips would be really appreciated! should i run the ECU main power direct to the battery??? what else could be causing this problem??? Thanks, Mark
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
