I sent you a pic of the carbs a while ago?. malcolm ----- Original Message ----- From: "Errol Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 05, 2004 11:45 PM Subject: RE: delorto's v webers
> Mal, > Both types of carbs are made of the same high zinc based diecast material. > In my experience both types give good performance but parts are easier to > get for Webers. Dellorto's are not cheaper, or a copy of a Weber. They were > developed as a competitor and it is commonly argued they may even have a bit > better mixture control. > > If you fit chokes you may get even better performance from those carbs, > unless the housing has been modified and special extended auxiliary vents > have been fitted. > Weber parts and Dellorto's cost about the same here. > > Cheers > Feral Errol > Get Serious! http://www.datrats.com.au/ > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of maldat > Sent: Monday, April 05, 2004 4:32 PM > To: [EMAIL PROTECTED] > Subject: Re: delorto's v webers > > Webers Vs Delortos > > Well from what I've seen and played with.. > > When it brecks Delortos are rubbish but Webers can be welded back up. > > Delortos are a cheaper copy of a weber,,(both made in itly?) > > I use 40mm that have no chokes.Most people running 40mm or 45mm are choked > down to about 32-38mm anyway. > Weber parts cost more to replace.. > > SU linkages will not work..But you can use parts from your datto so the > factory rod system is still used with twin side drafts. > > Ever woundered why their are more holes in the firewall where the piovt > is?.. > Its like the twins are stock fitment. > > Malcolm > ----- Original Message ----- > From: "Jeff Oldham" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, April 05, 2004 10:27 AM > Subject: delorto's v webers > > > > Hey fellow denizons of datsun land :) > > > > I may have access to a set of 40mm twin delortos with l-series manifold > for > > about $300.00 > > seems ok price to me ? > > > > what do you guys think, i still need to setup linkages but my su linkages > > may work ? > > > > anyone got an opinion on weather i should just grab them or wait till I > can > > afford some webers. > > should i hang out for 45mm ??? > > > > I take it that they will provide a lot more performance than my current > SU's > > ? (stock L16 engine) > > > > thanks jeff > > > > > > > > oh ps i bought 2 x yoko ao321r's on saturday :) havent had a chance to > test > > drive but they look like slicks with grooves cut in them & they are very > > very soft :) > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
