I've tried 45mm but they were choked down didnt run anything like my 40's.
I have sent out pic's before of down the carb's When I took them in and got them reco'ed the dude said they were a rather trick pair..He said they had been redrilled in a few places and blanking plates weled inside, the air/fuel flow were not stock. This is the way they were when I brought my SSS and carbs were on it. Loves petorl Avgas makes it humm, Did use once a full tank of Avgas going on a 60 mile drive. Malcolm Worth every cent ----- Original Message ----- From: "Warren Phillip-Clarke" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 05, 2004 9:34 PM Subject: RE: delorto's v webers > Malcolm I too have 40's was just wondering how the venturi's go in without > chokes? Or do they simply hold themselves. > > I have a friend who runs SU's around town and then whacks the Webers on when > it's racing time. > > Don't know anyone with Delorto's, but if your spending the money maybe I > think 45's would be the way to go anyways? > > Warren > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of maldat > Sent: Monday, 5 April 2004 2:32 PM > To: [EMAIL PROTECTED] > Subject: Re: delorto's v webers > > Webers Vs Delortos > > Well from what I've seen and played with.. > > When it brecks Delortos are rubbish but Webers can be welded back up. > > Delortos are a cheaper copy of a weber,,(both made in itly?) > > I use 40mm that have no chokes.Most people running 40mm or 45mm are choked > down to about 32-38mm anyway. > Weber parts cost more to replace.. > > SU linkages will not work..But you can use parts from your datto so the > factory rod system is still used with twin side drafts. > > Ever woundered why their are more holes in the firewall where the piovt > is?.. > Its like the twins are stock fitment. > > Malcolm > ----- Original Message ----- > From: "Jeff Oldham" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, April 05, 2004 10:27 AM > Subject: delorto's v webers > > > > Hey fellow denizons of datsun land :) > > > > I may have access to a set of 40mm twin delortos with l-series manifold > for > > about $300.00 > > seems ok price to me ? > > > > what do you guys think, i still need to setup linkages but my su linkages > > may work ? > > > > anyone got an opinion on weather i should just grab them or wait till I > can > > afford some webers. > > should i hang out for 45mm ??? > > > > I take it that they will provide a lot more performance than my current > SU's > > ? (stock L16 engine) > > > > thanks jeff > > > > > > > > oh ps i bought 2 x yoko ao321r's on saturday :) havent had a chance to > test > > drive but they look like slicks with grooves cut in them & they are very > > very soft :) > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
