well i have 4.1 at moment and i also do burnout so what you recommend.
-----Original Message-----
From: Jeff Oldham [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 27, 2004 10:13 AM
To: [EMAIL PROTECTED]
Subject: RE: Diff ratio
Importance: High
Mohit,
wouldnt you want a higher ratio for drag racing ?
Subject: RE: Diff ratio
Hi guys,
i have a datsun 1400 and i have checked about 3 diffs but all of them has a
diff ratio of 4.1 and im looking for 3.7 or 3.5 does anyone of you know
where i can get one from.
-----Original Message-----
From: Chris Howard [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 26, 2004 5:54 PM
To: [EMAIL PROTECTED]
Subject: RE: Diff ratio
No probs, they are a pretty rare ratio, took me ages to find one... AFAIK
the only vehicle they came in was mid'79-'82 4x4 720 utes... It's the front
diff (the rear is a solid axle).
Cheers,
Chris Howard
[EMAIL PROTECTED]
http://turbovan.com
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Mark Overend
> Sent: Wednesday, 26 May 2004 3:09 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Diff ratio
>
> Thanks Chris, I'll go and take the back plate of a few r180
> diffs on the weekend and have a look. MarkO
>
> >>> [EMAIL PROTECTED] 05/26/04 01:09pm >>>
> I have one in my 1600 and it had 35 teeth on the crown wheel
> and 8 on the
> pinion... 35/8 = 4.375
>
> Cheers,
>
> Chris Howard
> [EMAIL PROTECTED]
> http://turbovan.com
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > Mark Overend
> > Sent: Wednesday, 26 May 2004 10:22 AM
> > To: [EMAIL PROTECTED]
> > Subject: Diff ratio
> >
> > Can any one tell me the number of teeth on a r180 crown and
> > pinion to make a 4.4 ratio.
> >
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
