Lower your launch revs? or get wider wheels/better tyres!!
Whats your rear end like? I mean on your car!!! You got lowered suspension?
What size wheels/tyres? Lots of things come to play... but I'm not sure the
best way you stop wheel spin is to up your diff ratio... You should be ok
getting traction, even with an L20B.
Cheers,
Richard
From: "Mohit K. Autar" <[EMAIL PROTECTED]>@datascribe.com.au on
27/05/2004 20:19 ZE12
Please respond to [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
cc:
Subjec RE: Diff ratio
t:
well i have 4.1 at moment and i also do burnout so what you recommend.
-----Original Message-----
From: Jeff Oldham [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 27, 2004 10:13 AM
To: [EMAIL PROTECTED]
Subject: RE: Diff ratio
Importance: High
Mohit,
wouldnt you want a higher ratio for drag racing ?
Subject: RE: Diff ratio
Hi guys,
i have a datsun 1400 and i have checked about 3 diffs but all of them has a
diff ratio of 4.1 and im looking for 3.7 or 3.5 does anyone of you know
where i can get one from.
-----Original Message-----
From: Chris Howard [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 26, 2004 5:54 PM
To: [EMAIL PROTECTED]
Subject: RE: Diff ratio
No probs, they are a pretty rare ratio, took me ages to find one... AFAIK
the only vehicle they came in was mid'79-'82 4x4 720 utes... It's the front
diff (the rear is a solid axle).
Cheers,
Chris Howard
[EMAIL PROTECTED]
http://turbovan.com
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Mark Overend
> Sent: Wednesday, 26 May 2004 3:09 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Diff ratio
>
> Thanks Chris, I'll go and take the back plate of a few r180
> diffs on the weekend and have a look. MarkO
>
> >>> [EMAIL PROTECTED] 05/26/04 01:09pm >>>
> I have one in my 1600 and it had 35 teeth on the crown wheel
> and 8 on the
> pinion... 35/8 = 4.375
>
> Cheers,
>
> Chris Howard
> [EMAIL PROTECTED]
> http://turbovan.com
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > Mark Overend
> > Sent: Wednesday, 26 May 2004 10:22 AM
> > To: [EMAIL PROTECTED]
> > Subject: Diff ratio
> >
> > Can any one tell me the number of teeth on a r180 crown and
> > pinion to make a 4.4 ratio.
> >
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------(See
attached file: InterScan_Disclaimer.txt)
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
InterScan_Disclaimer.txt
Description: Binary data
