Perth western Australia I have three complete diffs so I can pull one down as freight will be cheaper or I can send the whole thing.
Warren -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mohit K. Autar Sent: Friday, 28 May 2004 4:13 AM To: [EMAIL PROTECTED] Subject: RE: Diff ratio where you from.let me know so i check for the freight.whats the price like.is it just the gears or the center. -----Original Message----- From: Warren Phillip-Clarke [mailto:[EMAIL PROTECTED] Sent: Thursday, May 27, 2004 11:57 PM To: [EMAIL PROTECTED] Subject: RE: Diff ratio Dude if you want to swap a 4.11 for a 3.7 I think I have two I will have to check What is freight like to that little island of yours? warren -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mohit K. Autar Sent: Thursday, 27 May 2004 4:03 AM To: [EMAIL PROTECTED] Subject: RE: Diff ratio Hi guys, i have a datsun 1400 and i have checked about 3 diffs but all of them has a diff ratio of 4.1 and im looking for 3.7 or 3.5 does anyone of you know where i can get one from. -----Original Message----- From: Chris Howard [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 26, 2004 5:54 PM To: [EMAIL PROTECTED] Subject: RE: Diff ratio No probs, they are a pretty rare ratio, took me ages to find one... AFAIK the only vehicle they came in was mid'79-'82 4x4 720 utes... It's the front diff (the rear is a solid axle). Cheers, Chris Howard [EMAIL PROTECTED] http://turbovan.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Mark Overend > Sent: Wednesday, 26 May 2004 3:09 PM > To: [EMAIL PROTECTED] > Subject: RE: Diff ratio > > Thanks Chris, I'll go and take the back plate of a few r180 > diffs on the weekend and have a look. MarkO > > >>> [EMAIL PROTECTED] 05/26/04 01:09pm >>> > I have one in my 1600 and it had 35 teeth on the crown wheel > and 8 on the > pinion... 35/8 = 4.375 > > Cheers, > > Chris Howard > [EMAIL PROTECTED] > http://turbovan.com > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > Mark Overend > > Sent: Wednesday, 26 May 2004 10:22 AM > > To: [EMAIL PROTECTED] > > Subject: Diff ratio > > > > Can any one tell me the number of teeth on a r180 crown and > > pinion to make a 4.4 ratio. > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
