Rick, The GL came in the combinations you describe - Lennocks had their own GL that had a Clarion pushbutton radio, tacho, radials and the trim upgrade - pretty much what you call the sports pack. This is what the 5/72 GL that I bought new from Jason Datsun in Wagga had also - and some chrome bits along the sides. The stock GL had the small clock and Dunlop Guardians - one could never forget the experience of driving on those tyres.
regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of rclough Sent: Monday, 12 July 2004 10:03 PM To: [EMAIL PROTECTED] Subject: Re: Datsun factory tacho, wiring? It sounds like you have the factory tacho dash fitted to some Aussi models in 1972. If you bought a "GL" you could get either the "luxury pack" (read big clock face and trim upgrade), or the "sports pack" (read Tacho in lieu of the clock and radial ply tyres)! Is my memory correct Terry? Hence the "Tacho Dash" varient of the normal dash. There are not too many of them around, but they are not as rare as either model of the 1600SSS dash, which you can see on the Ozdat picture gallery. They have distinctively different dashboard designs. ----- Original Message ----- From: Stuey Roberts <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 12, 2004 7:57 PM Subject: Re: Datsun factory tacho, wiring? > sorry to repeat, but what is the sequence for wiring these up, the 2 whites > u can join togetherfor the negative on coil, the green goes to 12V+ and the > black is a normal negative??? is there a coloured wire behind the dash that > they hook up to??? > The tacho i have has an orange needle like the speedo,with a white ring the > same as the speedo, and have never seen another one like it..... any > ideas..... > > > >From: "Zac Campbell" <[EMAIL PROTECTED]> > >Reply-To: [EMAIL PROTECTED] > >To: <[EMAIL PROTECTED]> > >Subject: Re: Datsun factory tacho > >Date: Mon, 12 Jul 2004 10:02:15 +0930 > > > >The two white wires go in series with the negative side of the ignition > >coil. > > > > > >----- Original Message ----- > >From: "Mark" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Sunday, July 11, 2004 10:33 PM > >Subject: Datsun factory tacho > > > > > > > I have a Datsun tacho I'd like to check, which I guess will need +12v, > > > gnd and negative signal from coil at a minimum. > > > The wires on the back are: white (male), white (f), black and green. I > > > thinking black ->gnd, green->12v. > > > > > > Mark. > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > SEEK: Now with over 50,000 dream jobs! Click here: > http://ninemsn.seek.com.au?hotmail > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
