Hi there,
since we are on the topic of brake's.i have a question.will the 260z front disc brake
system fit on the 1600 some how.
what do i have to do too fit this in.
Mohit.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mark
Sent: Saturday, October 02, 2004 10:43 PM
To: [EMAIL PROTECTED]
Subject: Re: curious to know what these calipers are from?
I'm informed on the OzDat forum they're R31 Skyline...makes sense since
it's bolt spacing matches older 240k struts.
Am I correct in describing the Sumitomo as double piston i.e. single
opposed one each side and is this providing better braking that the R31
with a single piston?
my current calipers:
http://www.netspeed.com.au/mark/4sale/brakes.jpg
On 02/10/2004, at 6:43 PM, Jeff Oldham wrote:
> commodore maybe ?
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Mark
> Sent: Saturday, 2 October 2004 1:42 PM
> To: [EMAIL PROTECTED]
> Subject: curious to know what these calipers are from?
>
>
> Hi all, had these calipers sitting in my shed for a while and I want to
> fit them to 240k struts with 253mm disc - is it a bolt up job, do I
> have to be concerned about pad area and disc size?
> I don't know what these brakes are, they have know name on them just
> numbers cast into them, bolt spacing is 3.5" which matches my 240k
> struts (at least that's what I recall 240k struts as being). I don't
> know my master cyl size, buried under the fj20 plenum in my 1600 but
> has a dual remote fill setup like (Nissan Urvan?) and is running the
> 240 single pot Sumitomo calipers now - stopping is no problem, but heat
> built-up looks to far better handled by these old school alloys I have
> compared to Sumitomos.
>
>
> http://www.netspeed.com.au/mark/4sale/Datto-Images/35.jpg
> http://www.netspeed.com.au/mark/4sale/Datto-Images/36.jpg
> http://www.netspeed.com.au/mark/4sale/Datto-Images/36.jpg
>
>
>
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
