Mark, I checked my records, Mal said : "Toyota RN46 Hilux four pot cailpers are a 100% bolt on to the C110 legs using the 254mm nissan disc... Carnt buy 271mm new disk's in NZ so if you are here use 254mm with two pistion cailpers or toyota 4 pots.(Rn46) Maldat"
Sorry for the confusion, Rob ----- Original Message ----- From: "Mark Overend" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, February 01, 2005 1:03 PM Subject: Re: Brake rotors > Thanks for the info Rob, > I'll find out what new one's cost, > i will have to investigate further about those 4-pot calipers. Do you > know if those calipers fit straight on the strut. > Thanks Mark > > >>> [EMAIL PROTECTED] 02/01/05 2:04 pm >>> > I really don't know. But the caliper mounting holes would be in a > different > position relative to the new 270mm circumference. So I guess you would > need > different calipers or fabricate a bracket to push the caliper out by > 9mm. > Seems hardly worth the effort if u can get new discs, however Malcolm > said a > while back that new ones are NLA, at least in NZ. Stub axle design is > probably the same between C110/C210, knowing Nissan, but don't quote me > on > that. If you can get new 253mm discs then you have the option of > fitting > Toyota RN46 4-pot calipers. > > Cheers, > Rob > ----- Original Message ----- > From: "Mark Overend" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, February 01, 2005 5:05 AM > Subject: Re: Brake rotors > > > > Thanks for the email Rob, > > they are 253mm in diameter. > > Can i fit 270mm on or will they not fit. > > Cheers Mark > > > > >>> [EMAIL PROTECTED] 01/31/05 11:17 pm >>> > > What size disc? I have a 4 x 240K GL sedan (C110) discs at 271mm > dia. > > All are still above legal thickness and usable. You may have 253mm > > discs. > > I'm in Perth. > > > > Rob P > > > > ----- Original Message ----- > > From: "Mark Overend" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Monday, January 31, 2005 5:50 AM > > Subject: Brake rotors > > > > > > > Gday everyone, > > > I am wanting to buy some rotors for my > > 180b > > > it has C210 skyline struts can anyone recommend where to get some > in > > > Melbourne. My mate machined them and they run out by .5mm( dodgey > > > mechanic) so i need some new ones or good second hands. > > > > > > Cheers Mark > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
