what a blow out u can buy the 253mm but not the 271mm, trippy? i have seen the toyota 4 pot on a 271mm rotor, Andy Neilsen 1600 had them
heath ----- Original Message ----- From: "Rob P" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, 2 February 2005 2:50 Subject: Re: Brake rotors > Mark, > I checked my records, Mal said : > "Toyota RN46 Hilux four pot cailpers are a 100% bolt on to the C110 legs > using the 254mm nissan disc... Carnt buy 271mm new disk's in NZ so if you > are here use 254mm with two pistion cailpers or toyota 4 pots.(Rn46) > Maldat" > > Sorry for the confusion, > > Rob > ----- Original Message ----- > From: "Mark Overend" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, February 01, 2005 1:03 PM > Subject: Re: Brake rotors > > > > Thanks for the info Rob, > > I'll find out what new one's cost, > > i will have to investigate further about those 4-pot calipers. Do you > > know if those calipers fit straight on the strut. > > Thanks Mark > > > > >>> [EMAIL PROTECTED] 02/01/05 2:04 pm >>> > > I really don't know. But the caliper mounting holes would be in a > > different > > position relative to the new 270mm circumference. So I guess you would > > need > > different calipers or fabricate a bracket to push the caliper out by > > 9mm. > > Seems hardly worth the effort if u can get new discs, however Malcolm > > said a > > while back that new ones are NLA, at least in NZ. Stub axle design is > > probably the same between C110/C210, knowing Nissan, but don't quote me > > on > > that. If you can get new 253mm discs then you have the option of > > fitting > > Toyota RN46 4-pot calipers. > > > > Cheers, > > Rob > > ----- Original Message ----- > > From: "Mark Overend" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, February 01, 2005 5:05 AM > > Subject: Re: Brake rotors > > > > > > > Thanks for the email Rob, > > > they are 253mm in diameter. > > > Can i fit 270mm on or will they not fit. > > > Cheers Mark > > > > > > >>> [EMAIL PROTECTED] 01/31/05 11:17 pm >>> > > > What size disc? I have a 4 x 240K GL sedan (C110) discs at 271mm > > dia. > > > All are still above legal thickness and usable. You may have 253mm > > > discs. > > > I'm in Perth. > > > > > > Rob P > > > > > > ----- Original Message ----- > > > From: "Mark Overend" <[EMAIL PROTECTED]> > > > To: <[email protected]> > > > Sent: Monday, January 31, 2005 5:50 AM > > > Subject: Brake rotors > > > > > > > > > > Gday everyone, > > > > I am wanting to buy some rotors for my > > > 180b > > > > it has C210 skyline struts can anyone recommend where to get some > > in > > > > Melbourne. My mate machined them and they run out by .5mm( dodgey > > > > mechanic) so i need some new ones or good second hands. > > > > > > > > Cheers Mark > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
