I am going to need to do this .. Flushing What flushing solvent did you use? There is some in a can sold around here at Autozones, and a version of it in a aerosol can. The label clams no residue and fast evaporating. Was it something like that.? The stuff in the aerosol can would keep me from getting a flush kit.
George Larribeau Dallas Texas ----- Original Message ----- From: "Luther" <[EMAIL PROTECTED]> To: "Mercedes Discussion List" <mercedes@okiebenz.com> Sent: Wednesday, August 13, 2008 8:07 PM Subject: Re: [MBZ] my first a/c R&R > The compressor is from Rusty, complete with the RPM sensor and harness. > Flushing is easy. Buy a "flush kit" which consists of a 1qt aluminum > pressure canister, hose, and spray gun. Fill the canister with a/c > flush solvent, hook up shop air to the canister, and spray the flush > through the system. Then remove the canister and blow DRY shop air > (nitrogen is preferred) through the system. Then Evac the system to > 30"hg for at least 1 hour. > > I _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
