if oil pressure is low at idle take the oil filler cap off and see how much blow by you have.
On Fri, May 17, 2013 at 10:12 PM, Chris James <c_ja...@gmx.com> wrote: > OM60x Min specs I believe are: 0.3 bar at idle and at least 3 bar at > 3000 rpm. Not sure what a 2.5 runs @ 60. 2200 RPM? So as long as it's > pegged by 80 your OK! :-) > > > Seriously though, from browsing the archive I'd replace both > the o-rings & oil filter to rule out any sealing/gasket issues. IF that > doesn't change anything you need to explore further....bad relief valves > (filter and/or pump), worn oil pump, pickup screen blockages ect.... > > Good luck....! > > > On 5/17/2013 8:32 PM, Rick Knoble wrote: > >> I changed the sender out today. No change. Will do the o-rings >> tomorrow. I hope I haven't done any damage by running it with low >> oil pressure. >> >> Rick >> > > -- > Chris J. > > > ______________________________**_________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives > http://www.okiebenz.com/**archive/<http://www.okiebenz.com/archive/> > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.com<http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com> > _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com