_______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
I got the slave cylinder and master cylinder swapped out and now down to
bleeding it. I have a line hooked up from RF caliper to the slave
cylinder and have pumped the crap out the brake pedal and still no pedal
action (pedal stays down, does not come back up). I seem to recall
reading something about certain brands of replacement master cylinder
the rod does not come all the way back up. I do know on this one in
order to attach it to the brake pedal I had it push the rod in maybe an
8th of an inch or so. I may unbolt it from the pedal and try bleeding
it again. Otherwise, any other ideas for getting it bled?
- [MBZ] Bleeding 240D clutch Kaleb Striplin via Mercedes
- Re: [MBZ] Bleeding 240D clutch G Mann via Mercedes
- Re: [MBZ] Bleeding 240D clutch G Mann via Mercedes
- Re: [MBZ] Bleeding 240D clutch Mitch Haley via Mercedes
- Re: [MBZ] Bleeding 240D clutch Mitch Haley via Mercedes
- Re: [MBZ] Bleeding 240D clutc... Kaleb Striplin via Mercedes
- Re: [MBZ] Bleeding 240D clutch Kaleb Striplin via Mercedes
- Re: [MBZ] Bleeding 240D clutc... Dan Penoff via Mercedes
- Re: [MBZ] Bleeding 240D clutc... Max Dillon via Mercedes
- Re: [MBZ] Bleeding 240D ... Kaleb Striplin via Mercedes
- Re: [MBZ] Bleeding 240D clutc... fmiser via Mercedes