I have a battery out of a car that is a Walmart AGM battery dated 12/20.  This was the 140 that I could not get into the trunk and the cables were not tight.  Car sat for many months and drained it dead.  Used a pair of jumper cables connected to a good battery (battery out of the car at this point as I was able to get into the trunk), and hooked charger up to it.  This got it charged up and unhooked 2nd battery.  Since then, both my pulse tech and various harbor freight smart charger will never bring it to a full charger per the chargers.  I hook up my electronic battery tester and it tests good.  Tried my old fashioned carbon tester and it also showed good.  Hook back up to charger and leave it overnight and it always errors out saying overtime charge.  On the pulse tech, after being on it a certain amount of time I have noticed it gets to the 75% light but eventually just shows bad battery.  I have not stuck it in a car to see if it will start one but I assume it will.  Why would the chargers never show it fully charged, but the volts show 12.8-13 volts right after removing from charger, and it tests good.  Should I return it to Walmart and see if I can get it exchanged?  I am assuming they will but a tester on it and it will test good so they wont warranty it despite it supposedly never reaching full charge.

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to