Hi,
we also switched to mainline kernels quite a while ago and now running
linux v5.4.y with 3d and 2d acceleration as well as multimedia
en-/decoding.
Only thing we are currently missing in mainline is a HW JPEG encoder.
just my 2 cents ;-)
regards;richard.l
On 11/12/2019 16:32, Stefan Birkholz wrote:
Hi Cory,
I had quite a few problems with imx-linux as well as linux-fslc, and we
also want to use the GPU, but are open to try the etnaviv driver instead
of vivante … this also simplifies our yocto build considerably! So far,
I’ve had much less trouble with the 4.19 mainline Kernel from kernel.org.
Cheers,
Stefan
*Von:*[email protected]
[mailto:[email protected]] *Im Auftrag von *Cory
*Gesendet:* Mittwoch, 11. Dezember 2019 16:20
*An:* [email protected]
*Betreff:* Re: [meta-freescale] imx6qdl based board won't boot with
kernel 4.9.x
Hi Stefan,
I've been also looking at moving to linux-fslc, but we are dependent on
the vivante GPU, so I am somewhat limited.
I've also completely removed our display subsystem configuration in the
device tree, just in case, just to try and get things booting.
Thanks for the information, it's good to know.
Cheers,
Cory
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#24168):
https://lists.yoctoproject.org/g/meta-freescale/message/24168
Mute This Topic: https://lists.yoctoproject.org/mt/68150691/3617580
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#24169):
https://lists.yoctoproject.org/g/meta-freescale/message/24169
Mute This Topic: https://lists.yoctoproject.org/mt/68150691/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
