Hi Stefan, The more I read about the lack of new/updated support by NXP for the i.MX6 makes me think the community might be better. The GPU performance is important to us, so that has been the big driver for staying with Vivante, but...now...
On Wed, Dec 11, 2019 at 5:32 PM Stefan Birkholz <[email protected]> wrote: > Hi Cory, > > > > I had quite a few problems with imx-linux as well as linux-fslc, and we > also want to use the GPU, but are open to try the etnaviv driver instead of > vivante … this also simplifies our yocto build considerably! So far, I’ve > had much less trouble with the 4.19 mainline Kernel from kernel.org. > > > > Cheers, > > Stefan > > > > *Von:* [email protected] [mailto: > [email protected]] *Im Auftrag von *Cory > *Gesendet:* Mittwoch, 11. Dezember 2019 16:20 > *An:* [email protected] > *Betreff:* Re: [meta-freescale] imx6qdl based board won't boot with > kernel 4.9.x > > > > Hi Stefan, > > I've been also looking at moving to linux-fslc, but we are dependent on > the vivante GPU, so I am somewhat limited. > > I've also completely removed our display subsystem configuration in the > device tree, just in case, just to try and get things booting. > > Thanks for the information, it's good to know. > > Cheers, > Cory >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#24171): https://lists.yoctoproject.org/g/meta-freescale/message/24171 Mute This Topic: https://lists.yoctoproject.org/mt/68150691/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
